717.336.2949

M-F from 7:30am to 5:00pm

717.354.6141

M-F from 7:00am to 5:00pm

We are now required to collect sales tax in Florida, Iowa, New Jersey & Ohio. If you are tax exempt, please create an account and send us your sales tax exemption form before placing an order. MORE INFO

/Products/Electric Motors/3 Phase/WEG/Oil Well Pump/02009ES3EOW326T-W22 WEG 20HP Oil Well Pump Electric Motor, 900RPM

Product ID: 02009ES3EOW326T-W22

02009ES3EOW326T-W22 WEG 20HP Oil Well Pump Electric Motor, 900RPM

MFG: WEG Electric Corporation
MFG Part Number: 02009ES3EOW326T-W22

Selected accessories will also be added to cart

$3,654.00 / Each

Quantity:

IC-411-TEFC, IP55, 324T/326T Frame, 208-230/460VAC 60Hz 3 Phase, 12686559, Standard Efficiency, Foot Mounted, Cast Iron Frame, 2-1/8" Keyed Shaft

Details
Purchase Components

Electric Motors

Frame	324/6T
Output	20 HP (15 kW)
Number of Poles	8
Frequency	60 Hz
Rated speed	840 rpm
Slip	6.67 %
Rated voltage	208-230/460 V
Rated current	65.9-59.6/29.8 A
L. R. Amperes	323-292/146 A
LRC	4.9x(Code G)
No load current	35.4-32.0/16.0 A
Rated torque	125 ft.lb
Locked rotor torque	280 %
Breakdown torque	0 %
Locked rotor time	32s (cold) 18s (hot)

Moment of inertia (J)	11.7 sq.ft.lb
Design	D
Insulation Class	F
Service factor	1.15
Temperature rise	80 K
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20°C to +40°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	F-2
Rotation¹	Both (CW and CCW)
Noise level²	56.0 dB(A)
Approx. weight³	531 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
85.5	86.5	85.5

Power factor

50%	75%	100%
0.54	0.67	0.74

Features

Frame Material	Cast Iron
Impregnation Method	Dip and Bake Polyester
Regreasing System	At Drive end and Non-drive end
Main terminal box hole	NPT 2"
Terminal Block	Without
Shaft Locking Device	Without
Drain	Rubber, automatic
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 9010 203A (ISO 12944 - C2)
Grounding Lugs	Single
Fan Cover material	Cast Iron
Tropicalized Painting	Without
Fan material	Plastic
Bearing cap	Yes- Bearing Cap
Balancing Method	1/2 Key
Drip Cover	Without
Overload protector (phenolic)	Without overload protector